Drager XAM 2500

Portable Gas Detectors
Single Gas
Limited life instruments (Disposable Gas Detectors)
Single gas (plus PID)
Multi gas
Multi gas (plus PID)
Photo ionisation detectors (PID)
Leak detectors (PPB)
Leak detectors (PPM)
Benzene detectors
Refrigerant leak detectors
Carbon dioxide CO2 (infrared)
Hydrogen monitor
Hydrocarbon HC (infra red)
Carbon monoxide CO detectors
Indoor air quality instruments
Confined Space 4 Gas Monitors
Portable Methane Detector
UltraSonic Leak Detection
Fixed Gas Detection Systems
Single Point
1-4 channel
1-10 channel
Addressable sytems up to 32
Addressable systems up to 64
Sampling Systems
PID fixed
Drager Fixed Gas Detection Monitoring
Refrigerant Fixed Gas Detection
Honeywell Fixed Gas Detection Systems
Landfill Gas Analyser
Landfill Gas Analysers
Wireless Gas Detection Systems
Wireless
Gas Detection Tubes
Detection Tubes
Area Monitoring Devices
Area Monitoring
Sub Slab Monitoring
The Vapour Pin System
RAE Systems Spares & Accesories
MiniRAE 2000 PID Spares
MiniRAE 3000 PID Spares
QRAE II spares
EntryRAE Spares
UltraRAE 3000 Spares
Replacement RAE Sensors
Replacement Gas Monitors Sensors
Replacement Drager Spares & Sensors
Replacement Crowcon Spares & Sensors
Replacement BW Spares & Sensors
Gas Detection Badges
TDI/MDI Badges
Gas Detection Badges
Calibration Systems
Calibration Systems and Kits
Fumigation Products
Fumigation Monitor
Calibration Gas
Calibration Gas Regulator
Water Quality Meter
YSI Pro Plus Quattro
Temperature and Pressure Calibrators
Temperature Calibrators
Digital Pressure Calibrator
Pressure Calibrator
Marine Test Case
Pressure Pumps
Digital Pressure Meter

Drager XAM 2500

Sale!£713.54 £340.00 ex. VAT

Durable electrochemical sensors

Fully developed, high performance Dräger sensors in an extra small format for CO, H2S, O2, SO2 and NO2 gases enable safe use in industry, mining and in refineries. The impressive hydrogen sulphide sensor has a high resolution, so it can reliably measure even very low workplace limits. The non-consumptive and lead-free sensor for oxygen is characterized by an especially long service life of more than 5 years. Our CO and H2S sensors also have this long service life expectation, so they contribute to especially low operating costs.

Maximum safety

The Dräger X-am 2500 has Ex approval for zone 0, so it is clearly designed for very high user safety in areas subject to explosion hazard. The functional design ensures that gas can enter from above and from the side – even if the instrument is inside a pocket or if the front gas entry is accidentally covered.

Diffusion or pump

For clearance measurements for tanks and shafts or when searching for leaks, an optional external pump with a hose up to 30 m long is the optimum solution. When the measuring instrument is inserted, the pump function starts automatically. The switch from diffusion to pump operation can be handled quickly and easily without tools or screws.

Reliable power supply

The Dräger X-am 2500 can operate with either alkaline batteries or with rechargeable NiMH batteries. This enables a reliable power supply for more than 12 hours, and with the high capacity battery pack more than 13 hours. Depending on the requirements, the batteries can be charged either in the workshop or in a vehicle. Operating time without Ex sensor is typically more than 250 hours.

Poison resistant ex sensor

The innovative, catalytic Ex sensor is impressive due to its high resistance to silicone and hydrogen sulphide. Together with the high degree of drift stability, this resistance enables an extraordinarily long service life of more than 4 years. Its high sensitivity with regard to flammable gases and vapours is confirmed by technical approval for measuring according to IEC/EN 60079-29-1 from methane to nonane. This approval also demonstrates the suitability of this instrument for use in refineries and in the chemical industry as well.

Maintenance: fast, easy, inexpensive

From functional test to complete documentation, users have access to practical solutions that provide safety for implementation at any time. The Dräger Bump Test Station, which does not require a local power source, and the automatic Dräger X-dock testing and calibration station for comprehensive equipment management are ideal system additions that save time and effort. Together with the Dräger X-dock, the high quality Dräger sensors enable quick bump tests of 8 to 15 seconds1 with very low gas consumption. This significantly reduces your equipment operating costs.

1) With standard sensors: CH4, O2, CO, H2S

Ergonomic and robust

Thanks to its low weight and ergonomic design, the Dräger X-am 2500 offers a high degree of wearing comfort. The practical two button control panel and easy menu navigation allow the instrument to be used intuitively, despite its comprehensive functionality. The integrated protective rubber coating and sensors that are not sensitive to shock provide additional safety in case of impacts or vibrations. Moreover, the Dräger X-am 2500 is not sensitive to electromagnetic radiation, e.g. from wireless devices. The Dräger X-am 2500 is water and dust resistant in accordance with protection class IP 67, so full functionality is guaranteed even if it falls into the water.

I will be needing the following options … *

Please select a maximum of option.

Description

The Dräger X-am 2500® was especially developed for use as personal protection. The 1 to 4 gas detector reliably detects combustible gases and vapours, as well as O2, CO, NO2, SO2 and H2S. Reliable and fully mature measuring technology, durable sensors and easy handling guarantee a high degree of safety with extremely low operating costs.

Brand

Drager

Additional information

What's included for the price?

– comes c/w power pack and charging set ( module and single charger )

Reviews

There are no reviews yet.

Be the first to review “Drager XAM 2500”

Your email address will not be published. Required fields are marked *

footer_logo1

With over 80 years combined experience, Ribble Enviro is at the forefront of the gas detection market.

As the title suggests, we only do gas detection with no gimmicks and no fancy promises. Our open and honest policy enables us to show you our prices on the web with nothing hidden and no surprises. Whether you want to buy, hire or have equipment serviced, the price is there for you to see.

CONTACT

North West Office
Unit 4, Gisburn Business Park, Gisburn,Nr Clitheroe, BB7 4JP

North East Office
R130 Wilton Centre, Redcar, Teesside, TS10 4RFJP