KEY FEATURES
-Simultaneous installation of 7 (5 until July, 2011) measurement sensors
-Measure O2, CO, NO, NO2, H2S and SO2
-Measure direct CO2% through NDIR (non dispersive infrared technology) miniature bench
-Calculate CO2 % and all combustion parameters
-Special selected Low NO and LOW NO2 sensors
-True NOX measurement down to 0.1 ppm resolution
-Emission reporting in mg/m³ and mg/sec
-Optional CO measurement sensor up to 10%
-Large 3.5" TFT colour display
-Real Time data transfer to a PC/Notebook
-Task oriented menu with easy programme recall
-Blue Tooth interface / Mini USB / SD card
-Gas Flow velocity and mass calculation
-Integral advanced water trap
-Li-Ion lasting battery operated
-Less than 800 grams
-Large selection of sampling probes
Rasi 700 Specification at a glance
| Measured Paramter |
Nominal Range |
Extended Range |
Resolution |
O2
|
0 to 21 %
|
n/a
|
0.1%
|
CO Low
|
0-300 ppm
|
n/a |
0.1 ppm |
CO (H2)
|
0-4000 ppm
|
0-10.000 ppm |
1 ppm |
CO High
|
0-4000 ppm
|
0-20.000 ppm |
1 ppm |
CO Very High
|
0-4 %
|
0-10 % |
1% |
NO
|
0-1000 ppm
|
0-4000 ppm |
1 ppm |
NO2
|
0-200 ppm
|
0-1000 ppm |
1 ppm |
| Low NO |
0-300 ppm
|
n/a |
0.1 ppm |
| SO2 |
0-2000 ppm |
0-5000 ppm |
1 ppm |
| H2S |
0-2500 ppm |
0-2500 ppm |
1 ppm |
| NDIR infrared technology (direct CO2% measurement) |
| CO2 |
0-20% |
0-40% |
0.1% |
| Pressure |
-100 to +100 mbar |
n/a |
0.1 mbar |
| Temperature |
to 1100 deg C |
n/a |
0.1 deg C |
| Flow |
1 m/s to 100 m/s |
n/a |
0.1 m |
| Reference |
Variable O2 reference |
| Emission Paramters |
Mg/Nm³, NOx as mg/m³ NO2 true measurement of Nox=NO+NO2, including O2 variable reference standard
mg/sec |
| Combustion Parameters |
CO2, excess air, heat losses, combustion efficiencies, flue gas dew point, CO/CO2 ratio |
| Fuel list |
Natural gas, liquid gas, heavy Oil, light Oil, pellets, wood, bio diesel, user define list |
Applications
Rasi 700 Applications
- Commission, Servicing and Maintenance of Industrial Burners and Furnaces
- Adjusting and Optimization of Gas and Diesel Engine
- Low NOx measurement on Gas Turbine
- Industrial Emissions Measurement
- Combustion Processes Optimization
|
|
|
Rasi 700 Probes
Rasi 700 Sampling probe to suit every application
|
|
Our range of probes hand hoses cover every application with an extended temperature range up to 1100°C and different sizes. All probe types have interchangeable shaft, position cone and measure temperature by using an integrated thermocouple type K.
A special sampling line is used to maximise the accuracy reading when measuring NO2 and SO2 cells are installed.
Interchangeable shaft for maximum flexibility. It is important to select the right probe depending of your application. A basic criteria would be to know the maximum temperature and the diameter of the flue/stack. Remember the probe should be positioned in the middle of the stack.
Our modular sampling probes offer the greatest flexible solution to match the need of the application and reduce cost at the same time. All you need is one sampling modular probe and a choice of probe shaft to suit at the best your needs.
|
Technical specification table
| Gas Sampling Probes (probe grip) |
Modular Flue gas probe, available in two different lengths, integrated Tc Type K for Temperature measurement, continous draft measurement.
Please select at least one replaceable shaft.
|
P/N
|
Description
|
62741
|
Modular gas sampling handle complete with 2700 mm VITON Line
|
62747
|
Modular gas probe handle complete with 5000 mm VITON Line
|
Probes replaceable shaft
|
55583
|
300 mm x 8 mm probe shaft, Tmax 650°C
|
| 59292 |
500 mm x 8 mm probe shaft, Tmax 650°C
|
55672
|
750 mm x 10 mm probe shaft, Tmax 650°C
|
55673
|
1000 mm x 10 mm probe shaft, Tmax 650°C
|
55674
|
1500 mm x 10 mm probe shaft, Tmax 650°C
|
55464
|
2000 mm x 10 mm probe shaft, Tmax 650°C
|
| Probes replaceable shaft, High Temperature |
| 60626 |
750 mm x 8 mm probe shaft, Tmax 1100°C
|
| 56737 |
1000 mm x 8 mm probe shaft, Tmax 1100°C |
| 56738 |
1500 mm x 10 mm probe shaft, Tmax 1100°C |
| Probes replaceable shaft, with preliminary filter |
| 60183 |
750 x 10 mm probe shaft, Tmax 500°C with sintered metal filter |
| 60814 |
1000 mm x 10 mm probe tip, Tmax 500°C with sintered metal filter |
| 60815 |
1500 mm x 10 mm probe tip, Tmax 500°C with sintered metal filter |
Benefits and Features:
-Modular probes with interchangeable shaft.
-Choice of different probe shaft up to 2000 mm, 2700 mm or 5000 mm length sampling line.
-Special designed line for SO2 and NO2 reading optimization.
-Choice of optimal preliminary filter.
Rasi 700 Kits
Rasi 700 Kits - Emission Monitoring has never been so cost effective
|
|
We have made the purchasing of the EiUK Rasi 700 even more convenient and easy by assembling already configured KIT's which save you money and time, and more imprtantly they give you the technical configuration that you need.
We do appreciate that all combustion process are unique, but working closely with our customers and by experience we have been able to put together different kit configuration for specific applications.
EiUK Rasi 700 deliver top performances at break through prices. The only hand held 5 cells emission analyser for industrial combustion systems which is truly affordable and make emission monitoring affordable for every body.
This is our continue to a better and greener world.
|
Benefits and Features:
- Ready to use configured kits, all the parts you need are included.
-Save you money and time by selecting your kit by application.
-Ensure the correct configuration is selected for the correct application.
-Flexible and upgradeable.
Downloads
Rasi 700 Downloads
Datasheet
Manual